Tauros 5B-800 PTO shaft
Series 05B PTO shaft, 800 mm long, for tractors from 50 HP. It has a shear bolt for overload protection, 1 3/8" 6-spline yokes and a safety guard with chains.
| Category: | ZX25c |
|---|
The Tauros 5B-800 PTO shaft transfers power from the tractor's power take-off to the attached implement. It is the heavier-duty version for tractors from 50 HP and for implements with higher power demand, such as wood chippers, larger mulchers or wider rotary tillers. A marking on the tube shows which end goes to the tractor.
The shaft has a shear bolt. If the implement jams or is overloaded, the bolt shears and protects the gearboxes of both the tractor and the implement. Then you simply replace the bolt with a new one.
Choose the shaft by the power the implement needs, not only by the tractor's output. If the implement needs more than the shaft can transmit, the shaft can be damaged the first time it is loaded.
TECHNICAL PARAMETERS
| Model | Tauros 5B-800 |
| Series | 05B |
| Max. torque | 460 Nm |
| Recommended tractor power | from 50 HP |
| PTO speed | 540 rpm |
| Yoke profile | 1 3/8", 6 splines |
| Length (closed) | 800 mm |
| Overload protection | shear bolt |
| Safety guard | yes, with chains |
Discussion
Be the first who will post an article to this item!